How to capture an Epson log for the TM-S2000/9000

How to capture an Epson log for the TM-S2000/9000

In order to enable Epson API logging for the TM-S2000/9000 you must enable logging through an INI file.
  1. Locate "LogSettings.ini" in the following location:
    1. C:\Program Files\EPSON\TMSDriver\bin
    2. (If both 32 bit/64 bit are in a 64 bit OS, the 64 bit version is stored in the x64bin folder.)
  2. Modify the option "LogEnabled" to 1 to enable API log output.
    1. Be sure to save the LogSettings.ini file after modification to ensure the option is set.
  3. Once logging is enable you can find the log file "TMS2000API_MM-DD-YYYY_XX.log" in the following location:
    1. %ALLUSERSPROFILE%\EPSON\TMSDriver\Trace
Please contact support@sbullet.com, if you have any further questions.
Ranger® - The universal check scanner interface
Copyright © 2023 Silver Bullet Technology
 www.sbullet.com


    • Related Articles

    • Is the Epson TM-S1000 supported by Ranger?

      The TM-S1000 is supported by Ranger. TM-S1000 is another name for the CaptureOne. Ranger® - The universal check scanner interface Copyright © 2023 Silver Bullet Technology www.sbullet.com

    • New Firmware available for the Epson TM-S9000

      Attached below is a latest installer and batch file that silently update the firmware of the TM-S9000 to v1.07. Please connect your scanner, run the batch file, and allow for enough time for the process to complete. If the process is interrupted you ...

    • How do I capture and send a Ranger Remote log to technical support?

      Here are the steps to capture and send a Ranger log to Silver Bullet technical support. Steps to enable Ranger logging: Ranger Remote Log Viewer is enabled on install. Capture the behavior in question: Start Ranger Remote Log Viewer . This can be ...

    • How do I capture and send an internet browser's log to support?

      Here are the steps to capture and send a browser console log to Silver Bullet technical support. Start console logging: Open the Developer Tools for your browser. This can be done so in the following ways: Access it through Options>Tools Press F12 ...

    • How do I capture and send a Ranger log to technical support?

      Note: This only works for versions of Ranger 4.5 and above. For 4.4 and lower, please utilize the instructions in the next section. How can I tell what version of Ranger I am using? Here's what the SBT Log Viewer looks like Capture the behavior in ...