Is the Epson TM-S1000 supported by Ranger?

• Related Articles

• How to capture an Epson log for the TM-S2000/9000

  In order to enable Epson API logging for the TM-S2000/9000 you must enable logging through an INI file. Locate "LogSettings.ini" in the following location: C:\Program Files\EPSON\TMSDriver\bin (If both 32 bit/64 bit are in a 64 bit OS, the 64 bit ...

• New Firmware available for the Epson TM-S9000

  Attached below is a latest installer and batch file that silently update the firmware of the TM-S9000 to v1.07. Please connect your scanner, run the batch file, and allow for enough time for the process to complete. If the process is interrupted you ...

• I'm having trouble connecting to scanner TM-S2000 / TM-S9000

  TM-S2000 This scanner indicates errors with LED light codes on the machine. When one of these errors is present it is impossible to connect to the machine. One of these errors is caused by being out of ink. Of note is that these scanners come with ...

• Pocketing and Endorsement modes for TM-S2000 and TM-S9000 scanners

  As with all scanners supported by Ranger, by default Ranger sets up the scanner to scan in its fast possible mode. In Epson's high speed mode it is not possible to pocket items. To pocket items you must enable Epson's "Confirmation mode" which slows ...

• Ranger for Epson always reports transport is dead

  This is usually caused by an error in communication with the machine. Ensure that the machine is turned on and plugged into a USB2 port. Ensure that the proper drivers are installed on the machine. Ranger will not work with the old APD drivers, you ...