Ranger for Epson always reports transport is dead
This is usually caused by an error in communication with the machine.
- Ensure that the machine is turned on and plugged into a USB2 port.
- Ensure that the proper drivers are installed on the machine.
Ranger will
not work with the old APD drivers, you must have the latest Epson
drivers and firmware installed on your machine.
Ranger® - The universal check scanner interface
Copyright © 2023 Silver Bullet Technology
www.sbullet.com
www.sbullet.com
Related Articles
Trouble updating Epson TMS-2000/TMS-9000 drivers
If a previous version of Ranger for Epson TMS-2000 or TMS-9000 exists on the workstation you wish to install, please uninstall that version of Ranger and remove the Epson TMS drivers before installing the latest Ranger. Without an uninstall of the ...What are the Epson TMJ-9100 speed modes?
The Epson TMJ-9100 has two speed modes. NormalSpeed: 10 - 12 docs per min, but each item can be dynamically endorsed after MICR and Images have been read. HighSpeed: 25-30 docs per min, but only fixed endorsing is available. These can be set in the ...Is the Epson TM-S1000 supported by Ranger?
The TM-S1000 is supported by Ranger. TM-S1000 is another name for the CaptureOne. Ranger® - The universal check scanner interface Copyright © 2023 Silver Bullet Technology www.sbullet.comHow do I power cycle a Canon transport?
Sometimes Canon transports will deny connections. The is usually caused by the following: an application closed without shutting down its connection to the scanner properly an unrecoverable error occurs If rebooting the workstation is insufficient to ...Ranger for Epson TMJ-9100 hangs on initialization
The most common reason is not having the latest Service packs installed on your machine. Ensure that on a Windows 2000 machine you have service pack 4 installed. On a Windows XP machine make sure you have service pack 2 or greater installed. Ranger® ...