What are the Epson TMJ-9100 speed modes?

The Epson TMJ-9100 has two speed modes.

1. NormalSpeed: 10 - 12 docs per min, but each item can be dynamically endorsed after MICR and Images have been read.
   
2. HighSpeed: 25-30 docs per min, but only fixed endorsing is available.
   

These can be set in the J9100Options.ini file.

---

Ranger^® - The universal check scanner interface

Copyright © 2023 Silver Bullet Technology
www.sbullet.com

• Related Articles

• What are the Epson CaptureOne speed modes + features & limitations?

  The CaptureOne has two speed modes Normal Mode (high-speed): This is the default mode The scanner will send all items to pocket #1. If the generic option "NeedFrontStamp" is set to "true" then all items will be stamped, when a stamp/franker is ...

• Ranger for Epson TMJ-9100 hangs on initialization

  The most common reason is not having the latest Service packs installed on your machine. Ensure that on a Windows 2000 machine you have service pack 4 installed. On a Windows XP machine make sure you have service pack 2 or greater installed. Ranger® ...

• Pocketing and Endorsement modes for TM-S2000 and TM-S9000 scanners

  As with all scanners supported by Ranger, by default Ranger sets up the scanner to scan in its fast possible mode. In Epson's high speed mode it is not possible to pocket items. To pocket items you must enable Epson's "Confirmation mode" which slows ...

• Trouble updating Epson TMS-2000/TMS-9000 drivers

  If a previous version of Ranger for Epson TMS-2000 or TMS-9000 exists on the workstation you wish to install, please uninstall that version of Ranger and remove the Epson TMS drivers before installing the latest Ranger. Without an uninstall of the ...

• Ranger for Epson always reports transport is dead

  This is usually caused by an error in communication with the machine. Ensure that the machine is turned on and plugged into a USB2 port. Ensure that the proper drivers are installed on the machine. Ranger will not work with the old APD drivers, you ...