CR-120 & CR-150
Ranger: How-to force eject the document with a Canon CR-120/150?
The following call can force eject a document: Ranger.CallPassthroughMethod("FlushTrack(1)") Where '1' is the target pocket for flushed documents. Ranger® - The universal check scanner interface Copyright © 2023 Silver Bullet Technology ...
How do I determine the IP Address of the scanner?
These instructions are for the CR-120/CR-150 Network-Enabled Scanners. Once the network-capable scanner is installed and any firmware updates provided by Canon for the network-capable scanner have been installed properly, connect the scanner via USB ...
How do I configure Ranger to connect to a Canon Ethernet scanner?
These instructions are for the CR-120/CR-150 Network-Enabled Scanners. In the DriverOptions.ini for the CR-120 or CR-150 file, typically named "Canon-CR120CR150.ini", set the following option: [EthernetConfig] ScannerIpAddress=XXX.XXX.XXX.XX Where ...
I'm Missing Item Data
If you've recently switched to using the CR-120 or the CR-150 from another scanner and seem to be experiencing loss of item data, please make a review of your source code during TransportNewItem, TransportSetItemOutput, and TransportItemInPocket. ...
How do I capture Canon logs on the CR-120/150
The method of enabling Canon logging has changed for the CR-120/150. This method will not work on any other Canon scanners. In order to capture logs on these scanners, you need to enable an option in the Ranger Canon-CR120CR150.ini file. You can find ...