Panini Check Scanners
Where does Ranger install the Panini scanner diagnostic program?
By default, the Ranger installer places the Panini scanner diagnostic program here: C:\Program Files (x86)\Silver Bullet Technology\Ranger\Scanner Plug-ins\Panini-VisionAPI\API Files\Driver\MultiDemo\PaniniMultiDemo.exe Ranger® - The universal check ...
Will a Ranger/Panini combination for S1 Vision run in Windows XP?
We have not run into problems running Ranger on XP, but we do not know if the low-level Panini base software will run on it. Check with hardware tech support at Panini about this question. Ranger® - The universal check scanner interface Copyright © ...
Is Ranger for MyVision X compatible with Windows 98?
No, the Panini device drivers for the MyVision X do not work with Windows 98. Ranger® - The universal check scanner interface Copyright © 2023 Silver Bullet Technology www.sbullet.com
How can I make images darker or lighter on a Panini 120e?
Ranger for Panini is installed with an Image Adjustment utility. If it's not on the Ranger tools list, contact Panini for the latest version of Ranger. The image utility will let you adjust the image parameters that Ranger uses. Ranger® - The ...
Will Ranger for Panini S1 Vision run on Windows 2000?
Yes. However, Panini Image Subsystem software prior to v1.24 was not certified to run on Windows 2000. Ranger® - The universal check scanner interface Copyright © 2023 Silver Bullet Technology www.sbullet.com
I can't get RangerLogService to look at Bloodhound
If you have already tried enabling the Ranger Log in the Ranger Log preferences and nothing happens, then exit Bloodhound. Ensure that Ranger logging is turned on and that the RangerLog service is running. Run some items. Start Bloodhound. Ranger® - ...
How do I change rear endorsing on a Panini 120e?
The font for Panini 120e is smaller than for the NCR 7780 and you may find you have to move the endorsement/audit trail over so it falls in the appropriate zone. There's a limit of maximum characters and maximum characters per line. You can adjust ...
MyVision X: How do I change the horizontal offset for inkjet endorsing an item?
You can set the offset by changing an ini value in the driver options file (MVXOptions.ini). The ini setting is in the "Inkjet" section and is called "EndorsementOffset." valid range of values is 0-180 mm. Ranger® - The universal check scanner ...
How can I change the MVX handle double-feed handling?
The MVXOptions.ini file controls the double feed detection options. // [DoubleFeedDetection] // // Enable=true - double-feed detection will be enabled // false - double-feed detection will be disabled (default) // // PhotocellPower=n (where n is ...
Why am I receiving a "image compression error" on my MVX?
There are a few reasons that your MVX scanner would indicate a "image compression error": Your PC may be performing too slow to process all of the images sent from the scanner. Panini reports: MVX API version 2.26.1.3 was able to reduce compression ...
Why am I unable to re-install the MVX Ranger drivers?
According to Panini support, their 2.x installer needs to run at least a couple of times to clear up some registry settings. The Panini 2.x installer should be located in the following folder: C:\Program Files\Silver Bullet Technology\Ranger\MVX\API ...
Why does my scanner report empty even though I still have documents loaded?
Panini controls what options are enabled for your machine depending on what options were purchased for that machine. It's possible that there is a limit of documents on this machine. You may wish to contact your scanner supplier to change this ...
Do I need to define an image snippet to use OCR on an S1 Vision?
No, Ranger defines an image snippet automatically when you enable an OCR read zone. Ranger® - The universal check scanner interface Copyright © 2023 Silver Bullet Technology www.sbullet.com
Is it possible to manually install/uninstall my MyVisionX scanner?
Yes, you can manually install or uninstall your MVX scanner. There are some documents that you can reference for this action. Ranger® - The universal check scanner interface Copyright © 2023 Silver Bullet Technology www.sbullet.com
How should we handle endorsments with a MyVisionX scanner?
The TransportReadyToSetEndorsement is the preferred approach to endorsing. Implementing application behavior that is customized based on make, mode etc is no longer recommended. Please refer to the TransportReadyToSetEndorsement section in the Ranger ...
Is there a way to control the font of endorsments using a MyVisionX?
There are two ways to control the fonts on an MVX machine. The first method is through the MVXOptions.ini file in the [Inkjet] area. The second option is to use a passthrough event in your application: SetEndorsementFont Purpose: Set the endorsement ...
How do I get OCR and image data for pocket and print decisions and on the VX P?
The following only works with two pocket models or models that have a "reverse gear". The Panini check scanners use snippet areas to get OCR. Setting an OCR area in the GenericOptions.ini file defines a snippet area. The GenericOptions "[OcrReader1]" ...
Why is OCR not working for my MVX scanner?
Panini controls what options are enabled for your machine depending on what options were purchsed for that machine. It is possible that OCR has not been enabled on this machine. One way to determine if your scanner has OCR enabled is to check the ...
Ranger compatibility with the Vision X serial number change announced 05/24/2011
Compatibility with the Vision X serial number changes announced today, 05/24/2011, requires Panini Vision X API version 2.41.1.4 or newer. To ensure the installation meets the above requirement, Ranger for MVX / VX version 2.2.100 or newer (higher) ...
Problems upgrading Ranger for Panini MVX
Note: These instructions are only for Ranger v2. If you find MultiDemo (a Panini sample application) installed on the computer this indicates that more recent Panini drivers are installed. These drivers are not compatible with Ranger v2 and must be ...
How do I resolve an error of "R6030 - CRT not installed" during installation?
Make sure you're installing Ranger with Administrator permissions. If this problem continues then this is most likely a result of corrupt MFC v7 Redistributables. To resolve this problem, unzip and copy the attached files into the system directory. ...
How do I get a Panini Log?
Create the C:\ProgramData\Panini directory Put the file "logf.data" in there. Once that is done, logs start appearing in that directory. See also: How do I capture and send a Ranger log to technical support? Ranger® - The universal check scanner ...